Close
All Categories

    Divinycell H100 .5" Foam Core - 3 Layer Carbon Fiber 12" x 24"

    $231.12
    SKU: FDPLDCH100-.5x3_1224
    *

    DragonPlate's carbon fiber Divinycell foam core utilizes Divinycell H100 high performance core. This is a medium density structural foam with very high strength to weight ratio. With very large strength properties, this carbon fiber foam core laminate is an excellent choice for heavier duty applications where lighter density foams struggle. Divinycell H100 is also an excellent damage tolerant foam and is ideal for impact applications. The lay-up design is quasi-isotropic, consisting of three layers of carbon fiber on each side of a Divinycell foam core center. Available in gloss, matte or texture on one side and texture on other side for bonding to other surfaces. For foam specifications, please refer to the official Divinycell Foam Data Sheet.

    DragonPlate's carbon fiber Divinycell foam core utilizes Divinycell H100 high performance core. This is a medium density structural foam with very high strength to weight ratio. With very large strength properties, this carbon fiber foam core laminate is an excellent choice for heavier duty applications where lighter density foams struggle. Divinycell H100 is also an excellent damage tolerant foam and is ideal for impact applications. The lay-up design is quasi-isotropic, consisting of three layers of carbon fiber on each side of a Divinycell foam core center. Available in gloss, matte or texture on one side and texture on other side for bonding to other surfaces. For foam specifications, please refer to the official Divinycell Foam Data Sheet.

    Products specifications
    Sheet Size 12" x 24"
    Core Material Divinycell Foam
    Ply Orientation Woven 0/90 and ±45
    Max Temperature 140 F
    Fiber Modulus Standard (33 Msi)
    Composition CF (Woven) and Core
    Approx. Weight 1.507 lb
    Approx. Density 0.0051 lb/in2
    Customers who bought this item also bought

    Carbon Fiber Core Edge Trim .5" x 48"

    FDP-CORECAPS.500x48
    $89.91

    3M Scotch-Weld Epoxy Adhesive DP420NS Black 50ml Duo-Pak

    RMSCTHWLDDP420NSBLK1.7
    $49.75
    3M Scotch-Weld Epoxy Adhesive DP420NS is a black, non-sag, toughened, two-part epoxy adhesive. 2:1 mix ratio, 20 minute work life and handling strength in approximately 2 hours. Requires EPX Plus II applicator gun to dispense. 1.69oz/50ml

    3M Scotch-Weld Epoxy Adhesive 2216 B/A Gray Tube Kit

    RMSCTHWLD2216TB
    $74.00
    Highly Flexible, Two-Part Adhesive Kit highly recommended for DragonPlate bonding. Available tube or pint kit size.

    Divinycell H100 1" Foam Core - 3 Layer Carbon Fiber 6" x 6"

    FDPLDCH100-1x3_0606
    $43.44

    Carbon Fiber Roll Wrapped Uni Tube ~ 1" ID x 96", Gloss Finish

    FDPT1.0*.049*96
    $141.70
    Use this tube with our Modular Connector System to create complex structures.

    Tubes over 90" long have high shipping costs due to length. We offer one free cut to reduce length and save on your shipping costs. Contact us with your desired cut length. (cut tolerance is -0, +0.25")