Close
All Categories

    Carbon Fiber Nomex Honeycomb Core 0.75" x 24" x 36"

    $592.48
    Upon request, sheet can be cut into 2 pieces sized 12" x 24" and 24" x 24" with purchase. Additional face sheet and high modulus options available. Additional face sheet and high modulus options available.
    SKU: FDPLHPNMX.75S2436
    *
    *

    Please Allow 5-7 days before this item ships

    DragonPlate Nomex Honeycomb sheets are an excellent light weight composite sheet utilizing a Nomex Honeycomb core. Nomex honeycomb is the standard for lightweight non-metallic composite construction. Commercial Grade honeycomb made with aramid fiber paper (DUPONT Nomex or equivalent) coated with heat resistant phenolic resin offers excellent resiliency, low density, lower pricing and high strength to weight ratio. Similar to our foam core product line, Nomex honeycomb is another type of sandwich panel. In essence an I-Beam, the honeycomb acting as the web, and the top skins acting as the flanges.

     

    The advantage over an I-Beam is the core creates a box structure giving the panel additional torsional rigidity. Another benefit of a core material is as the core thickness increases the panels stiffness increases dramatically. The Nomex honeycomb offers additional compressive strength with lower densities when compared to low density foam cores. Nomex Honeycomb also has properties including moisture resistance, energy absorption, and sound and vibration dampening. The lay-up design is 0/90 uni-directional with twill weave face sheets with approximately 0.03 inches of carbon on each side of a Nomex honeycomb core.

     

    This sheet size has a satin finish on both sides, with options for the face sheet on both sides. Also available in this sheet size is the option for higher modulus uni-directional fabrics.

     

    Unlike other manufacturers of Nomex honeycomb, DragonPlate has paid close attention to the most critical component of a high quality honeycomb panel, the bond between the Nomex Honeycomb and the Carbon Fiber skin. If this bond is poor, the skin will easily peel off from the core, destroying the structural integrity of the panel. The contact area between a honeycomb core and the face skins in a sandwich composite is very small, and hence poor bonding is often a problem with these types of materials if incorrectly manufactured. Since the cell walls are thin, proper bonding of the honeycomb core to the face skins relies on the formation of high quality fillets. The fillet becomes the mechanism that transmits the loads from the skins into the honeycomb core.

    Without sufficient fillet size, the face skins will easily peel from the core.

    Since ultra-high modulus (UHM) carbon fiber material has certain export restrictions, customers are required to fill out a short form detailing the end use. Both the customer and application will need to be vetted before the product is able to ship.

     

    Please fill-out the PDF form and fax or email it back to us if you have ordered the UHM option.

     

    Please allow 10-15 days before this product ships if you have added any of the additional options.

    DragonPlate Nomex Honeycomb sheets are an excellent light weight composite sheet utilizing a Nomex Honeycomb core. Nomex honeycomb is the standard for lightweight non-metallic composite construction. Commercial Grade honeycomb made with aramid fiber paper (DUPONT Nomex or equivalent) coated with heat resistant phenolic resin offers excellent resiliency, low density, lower pricing and high strength to weight ratio. Similar to our foam core product line, Nomex honeycomb is another type of sandwich panel. In essence an I-Beam, the honeycomb acting as the web, and the top skins acting as the flanges.

     

    The advantage over an I-Beam is the core creates a box structure giving the panel additional torsional rigidity. Another benefit of a core material is as the core thickness increases the panels stiffness increases dramatically. The Nomex honeycomb offers additional compressive strength with lower densities when compared to low density foam cores. Nomex Honeycomb also has properties including moisture resistance, energy absorption, and sound and vibration dampening. The lay-up design is 0/90 uni-directional with twill weave face sheets with approximately 0.03 inches of carbon on each side of a Nomex honeycomb core.

     

    This sheet size has a satin finish on both sides, with options for the face sheet on both sides. Also available in this sheet size is the option for higher modulus uni-directional fabrics.

     

    Unlike other manufacturers of Nomex honeycomb, DragonPlate has paid close attention to the most critical component of a high quality honeycomb panel, the bond between the Nomex Honeycomb and the Carbon Fiber skin. If this bond is poor, the skin will easily peel off from the core, destroying the structural integrity of the panel. The contact area between a honeycomb core and the face skins in a sandwich composite is very small, and hence poor bonding is often a problem with these types of materials if incorrectly manufactured. Since the cell walls are thin, proper bonding of the honeycomb core to the face skins relies on the formation of high quality fillets. The fillet becomes the mechanism that transmits the loads from the skins into the honeycomb core.

    Without sufficient fillet size, the face skins will easily peel from the core.

    Since ultra-high modulus (UHM) carbon fiber material has certain export restrictions, customers are required to fill out a short form detailing the end use. Both the customer and application will need to be vetted before the product is able to ship.

     

    Please fill-out the PDF form and fax or email it back to us if you have ordered the UHM option.

     

    Please allow 10-15 days before this product ships if you have added any of the additional options.

    Products specifications
    Sheet Size 24" x 36"
    Core Material Nomex Honeycomb
    Ply Orientation Woven 0/90 and UD 0 and 90
    Max Temperature 250 F
    Finish Satin/Satin
    Composition CF (Woven and UD) and Core
    Approx. Weight 4.269 lb
    Approx. Density 0.0061 lb/in3
    Customers who bought this item also bought

    2" Square Tube Carbon Fiber Gusset 2D 90° Corner

    FDPGK-S*2-2C90
    $45.00

    Braided Carbon Fiber Square Tubing ~ 2" x 2" x 48"

    FDPBT-S*2x48
    $121.25

    Stainless Panel Stud - 10-24 thread - 1.5" tall

    FDPBF1024*1.5PNLSTUD
    $2.74

    Stainless Panel Stud - 8-32 thread - 1.5" tall

    FDPBF832*1.5PNLSTUD
    $1.75